September 13, 2026 · 5 min read
Send a spinning pot, not a screenshot
A still flattens glaze break. A share link lets another potter spin the form — capture, visualize, organize, bring to life.
Read the post
Loading piece…
Know before you throw.
Shape a piece in minutes, see it glazed and fired, and walk into the studio knowing exactly how much clay to wedge.
Live pieces — drag to spin.
How it works
Three steps, then you are at the wheel
Nothing to install and nothing to learn twice. The whole loop takes about five minutes the first time.
- 1
Shape
Pick a form — mug, bowl, plate, vase — and pull a few sliders. Or edit the profile curve directly, the same line you would check with a rib.
- 2
Glaze
Coat it, band it, pattern it. Flip between raw and fired — because the bucket never tells the truth.
- 3
Throw
Read the wet weight — shrinkage and trim allowance included — and go make the real thing.
What is inside
Everything a thrown piece needs, before it is thrown
Built around how pots are actually made — profile, glaze, weight, tools, and the record you keep afterwards.
Templates and free-form profiles
Start from six wheel forms, or drag your own curve point by point until the line is yours.
Fired and raw preview
Glazes rendered as they come out of the kiln, with a one-tap toggle back to bucket colour.
17 glaze patterns and a paint-on canvas
Bands, dots, waves, checker — 17 in all — or draw your own regions straight onto the unwrapped surface.
Clay weight that is actually right
Volume, shrinkage, and trim allowance computed from your exact shape. Calibrate it with one real thrown piece.
Stamp designer
Design your maker’s mark, preview it on the pot, then download the STL or have us print and ship it.
Custom ribs and jigs
A profile rib that matches your curve, exported for printing or laser cutting.
A studio journal
Photos, clay, weights, and glaze notes for every real piece, sitting next to the design it came from.
Share a spinning link
Anyone can look and spin it. Remixing takes ten seconds and a free account.
Fired previews are calibrated approximations — your kiln always gets the final word.
Pricing
Free while we are in early access
Paid plans arrive later this year, and early members keep founding-member pricing. The clay calculator stays free for everyone, always.
Free
$0Enough to design real pots and go throw them.
- Every wheel form and the profile editor
- Clay weight calculator, calibration included
- Share links and print ordering
Potter
$19FreeFor the potter making work every week.
during early access
- Full glaze library including brand glazes
- Stamp STL export and design sheets
- Clean screenshots, no wordmark
Studio
$29FreeFor production work and shared studios.
during early access
- Rib and jig exports in STL and DXF
- Priority glaze requests
- Everything in Potter
Notes from the studio
Reading for glaze day
August 4, 2026 · 7 min read
Why your glaze never looks like the bucket
Raw glaze is a suspension of ground rock. Fired glaze is glass. Nothing about the first predicts the second — here is what actually changes in the kiln.
Read the post
July 28, 2026 · 6 min read
How much clay should you throw for a mug?
The pound-of-clay rule is wrong about as often as it is right. Here is the arithmetic underneath it, with a worked example for a 95 mm mug.
Read the post
Start
Your next piece is five minutes away.
Shape it, glaze it, and get the weight. No card, no install.
Notes from the studio
Glaze tips, new features, and what the community is making. Once or twice a month, no noise.